Electric Drives Production Conference (E|DPC) 2019, 3rd – 4th December 2019

Motor Design Ltd will be exhibiting and presenting at the 2019 Electric Drives Production Conference conference in Esslingen, Germany.

Tuesday 3rd December I Session 6 I 2.30pm
Thermal Analysis of a Hollow-Shaft Rotor Cooling System for a High Speed High Power Automotive Traction Motor Institution – Dr. Gai, Yaohui, Motor Design Ltd.

Find out more on the event website.

 

Attending this event? Don’t miss our free, hands-on ‘Introduction to Motor-CAD’ workshop, which takes place on the 2nd December at the University of Stuttgart in Germany. Find out more here.

 

 


Designing an E-Machine: An electromagnetic problem?

Designing an E-Machine: An electromagnetic problem?

WEBINAR 1/3  I  WINTER WEBINAR SERIES  2019

 

About this webinar

Although it is widely accepted that a combination of electromagnetic, electrical, thermal and mechanical analysis is required to create a competitive electric machine, the initial sizing and design optimisation of the motor is often viewed as a problem that can be solved by electromagnetic analysis alone. Even in modern design optimisation methodologies, multiphysics analysis is generally recommended as a validation stage towards the end of the process, when design candidates have already been selected, parameters have been defined and there is a high cost of change.

In this webinar we explore how carrying out multiphysics analysis at initial stages of the design process can impact design decisions and ultimately result in a more competitive design.

 

Topics covered include:

  • Why is multiphysics design and analysis in the initial design phase important?
  • A comparison of design decisions based on multiphysics or EM analysis alone.
  • Using multiphysics analysis for high speed design with field weakening.
 

Who should watch?

Design engineers and technical professionals working in the field of electric machine design.

 

How to watch

To access the recording of the webinar ‘Designing an E-Machine: An electromagnetic problem?’, please follow this link to the GoToWebinar website and enter the requested details.

 

Click here to find out more about other webinars in this series.

Electric Machine Webinar Series

MDL will be participating in seven short webinars across June and July, as part of the Ansys Electric Machine Webinar Series!


Designing an E-Machine: Optimising electric machines with multiphysics analysis

Designing an E-Machine: Optimising electric machines with multiphysics analysis

WEBINAR 2/3  WINTER WEBINAR SERIES  I  2019

 

About this webinar

This webinar will show how Motor-CAD can be coupled with OptiSLang to provide a multi-physics, multi-objective optimisation procedure. An example is given where an electric vehicle motor is optimised to give maximum drive cycle efficiency, minimum cost and minimum size, while achieving a specified peak and continuous torque/speed requirement.

 

Topics covered include:

  • How to efficiently evaluate each design candidate against the full specification and objectives.
  • Leveraging state-of-the-art meta-model based optimisation methods for a groundbreaking workflow.
  • A data driven design approach resulting in rigorous design choices.
  • The ability to rapidly respond to changing requirements and evolving specifications.
 

Who should watch?

Design engineers and technical professionals working in the field of electric machine design.

 

How to watch

To access the recording of the webinar ‘Designing an E-Machine: Optimising electric machines with multiphysics analysis’, please follow this link to the GoToWebinar website and enter the requested details. 

 

Click here to find out more about other webinars in this series.

Electric Machine Webinar Series

MDL will be participating in seven short webinars across June and July, as part of the Ansys Electric Machine Webinar Series!


Designing an E-Machine: Building your workflow

Designing an E-Machine: Building your workflow

WEBINAR 3/3  I  WINTER WEBINAR SERIES  I  2019

 

About this webinar

This webinar shows how Motor-CAD can be seamlessly integrated into your workflow utilising links to other tools for system analysis and detailed physics-based modelling. Examples are shown on how to automatically export and set up a 3D finite element analysis solution from a Motor-CAD model, how to co-simulate with the Motor-CAD solver in a systems simulation environment and how to analyse combined motor and gearbox NVH behaviour.

 

Topics covered include:

  • How to work with 3D FEA and CFD tools alongside Motor-CAD in the design and development process.
  • How to integrate the motor models into vehicle, powertrain, cooling or electronics system models.
  • How to model detailed interactions between the motor and other components, such as the gearbox.
 

Who should watch?

Design engineers and technical professionals working in the field of electric machine design as well as mechanical and system engineers working with motor models.

 

How to watch

To access the recording of the webinar ‘Designing an E-Machine: Building your workflow’, please follow this link to the GoToWebinar website and enter the requested details.

Electric Machine Webinar Series

MDL will be participating in seven short webinars across June and July, as part of the Ansys Electric Machine Webinar Series!

  • DISTRIBUTORS

    The Motor-CAD software is distributed worldwide. Our carefully selected partners are experts in the use of the software and can provide support and training.

    To find a distributor near you, click on the link below.