Electric Machine Design — an Electromagnetic Problem?
June 23, 2020, 10 AM EDT / 2 PM GMT
- Is electric machine design an electromagnetic problem? This 20 minute webinar looks at the concept design of electric machines and demonstrates how design decisions are enhanced when multiphysics analysis is used when compared to only electromagnetic analysis.
Rapid Electric Motor Design — Evaluation of a Permanent Magnet Motor Against the Performance Specification
June 29, 2020, 10 AM EDT / 2 PM GMT
- This 20 minute webinar demonstrates how Ansys Motor-CAD can rapidly evaluate a candidate interior PM machine design using multiphysics analysis against the complete specification, including continuous torque/speed characteristics and drive cycle efficiency.
Rapid Electric Motor Design — Evaluation of an Induction Motor Against the Performance Specification
June 30, 2020, 10 AM EDT / 2 PM GMT
- This 20 minute webinar demonstrates how Ansys Motor-CAD can rapidly evaluate a candidate induction machine design using multiphysics analysis against the complete specification, including continuous torque/speed characteristics and drive cycle efficiency.
Electric Motor Optimization with Multiple Objectives — Drive Cycle Efficiency Versus Power Density
July 14, 2020, 10 AM EDT / 2 PM GMT
- This 20 minute webinar shows how Ansys Motor-CAD can be used with Ansys optiSLang to provide multi-objective optimization, using multiphysics analysis to evaluate each candidate design against the full specification.
Exporting and Co-Simulation of Ansys Motor-CAD Motor Models in a Systems Simulation
July 17, 2020, 10 AM EDT / 2 PM GMT
- This 20 minute webinar shows a range of options for modeling a motor in a systems simulation environment, using an Ansys Motor-CAD model. A range of electromagnetic, loss, thermal and control models are demonstrated with different levels of fidelity and computation speeds.
Combining Rapid Electric Motor Thermal Analysis with Detailed CFD Cooling Flow Simulation
July 22, 2020, 10 AM EDT / 2 PM GMT
- This 20 minute webinar demonstrates how the lumped parameter and flow networks used in Ansys Motor-CAD to provide rapid evaluation of thermal performance can be informed with detailed cooling flow modeling using CFD. We will show how using CFD models combined with thermal networks enables rapid thermal analysis over a drive cycle with accurate flow simulation for complex cooling mechanisms.
Seamless Model Transfer from Concept Design to Validation: How a Parameterized 3D Model Can Be Set Up in Seconds
July 23, 2020, 10 AM EDT / 2 PM GMT
- This 20 minute webinar shows how models can be transferred seamlessly from Ansys Motor-CAD into other Ansys tools and the complete Ansys tool chain. We will demonstrate how a 3D Ansys Maxwell model can be set up in seconds from Motor-CAD, including parameterized geometry, materials, boundary conditions, symmetry and excitations.
Visit the Ansys website to find out more and register.