About the conference

We are delighted to announce that Motor Design Ltd’s inaugural European Motor-CAD User Conference will take place on the 20th-21st February 2019, in Birmingham, UK. The two-day event will bring together engineers and researchers working on eMachine design to learn about technological developments, share best practice and discuss their challenges and approaches. 

Download the latest agenda here – Motor-CAD European User Conference 2019 Agenda

Day 1 (20th February) – Technical presentations from leading design engineers and Motor-CAD users

Join us on day 1 of the conference to meet Motor-CAD software users at the cutting edge of eMachine design, including speakers from Safran Electrical & Power, Nidec PSA e-motors, ZF Group, EM-motive, VEM Sachsenwerk GmbH, Drive System Design, BorgWarner, Rimac Automotive, Pierburg, the University of Zagreb and more.

Delegates are also invited to attend a conference dinner in Birmingham on the evening of day 1 (included in ticket price).

Day 2  (21st February) – Advanced modelling workshops

Our motor design specialists and partners will be running four advanced modelling workshops on day 2 of the conference. Join us for workshops on advanced electromagnetic loss modelling in electric machines, advanced lumped parameter thermal modelling techniques, optimisation solutions for electric machine design and a workshop on the combined Motor-CAD and ANSYS workflow.


Speaker highlights


[two-thirds]Jose Soler

Electrical Machines Expert – Safran Electrical & Power[/two-thirds]



[two-thirds]Lamya Belhaj

Electrical Machine Functional Architect – Nidec PSA e-motors[/two-thirds]



[two-thirds]Damir Vuljaj

Powertrain Engineering Manager – Rimac Automotive d.o.o.[/two-thirds]



[two-thirds]Xiaoyan Wang

Technical Specialist – Drive System Design[/two-thirds]



[two-thirds]Linus Pohle

Project Engineer – ZF Group[/two-thirds]



[two-thirds]Marc Brueck

Senior Expert for Simulation Technology – EM-motive[/two-thirds]



[two-thirds]Stefan Ulbrich

Electromagnetic and Thermal Electrical Machine Design Engineer – VEM[/two-thirds]



[two-thirds]Damir Zarko

Professor – University of Zagreb Faculty of Electrical Engineering and Computing[/two-thirds]


Please view our preliminary agenda for Day 1 of the conference to see a full list of speakers.


Join us on the 20th February to hear from Motor-CAD software users at the cutting edge of eMachine design.

Download the latest agenda here – Motor-CAD European User Conference 2019 Agenda


9.00 – 9.30   Registration and Tea/Coffee

9.30 – 11.00  Session 1

  • High Performance Smart-Machines for Hybrid Electric Aircraft Applications – Jose Soler, Safran Electrical & Power
  • Comparison between Permanent Magnet and Wound Field Synchronous Machines for Traction Application: Efficiency and Energy Consumption – Lamya Belhaj, Nidec PSA e-motors
  • Transient Electromagnetic and Thermal Modelling of an Induction Motor for a Low-Floor Tram – Damir Zarko, University of Zagreb, Faculty of Electrical Engineering & Computing

11.00 – 11.30   Tea/Coffee

11.30 – 12.45   Session 2

  • Using Motor-CAD as Embedded Thermal Calculation Module Stefan Ulbrich, VEM Sachsenwerk GmbH
  • Gearing Up for Lower Cost Electric Drives – Novel Methods for Analysing Integrated Electric Powertrains Xiaoyan Wang, Drive System Design
  • Electromagnetic and Thermal Analysis of Synchronous Reluctance Motor Magnets Free Alberto Grava, Spin Applicazioni Magnetiche Srl

12.45 – 13.45   Lunch

13.45 – 15.10   Session 3

  • Motor-CAD v12 Dougie Hawkins, Motor Design Ltd
  • Iterative EM Design Optimization of Hybrid Power Train Motors Using MATLAB and Motor-CAD –  Tausif Husain, BorgWarner
  • Electrical and Thermal Analyses of a High Speed Permanent Magnet Motor for an Electrical Air Charging System – Stefan Dewenter, Pierburg GmbH

15.10 – 15.40   Tea/Coffee

15.40 – 17.00   Session 4

  • Product Development, Verification and Validation Damir Vuljaj, Rimac Automotive d.o.o.
  • Overview of Different Simulation Models in the Motor Development Process of Braking Products – Linus Pohle, ZF Group
  • Reduced-Order-Models of Electric Motors for Systems Engineering – Built with a Motor-CAD-optiSLang Workflow – Marc Brueck, EM-motive

19.00   Conference Dinner

We will continue to update this agenda in the upcoming months – please check back to see the most recent details. Please note, this agenda may be subject to change.



Advanced Modelling Workshops

Our motor design specialists and partners will be delivering four advanced modelling workshops on the 21st February. Registration will open at 9am and the final workshop will finish at 4.30pm. 

Download the latest agenda here – Motor-CAD European User Conference 2019 Agenda


Workshop 1 – Advanced Electromagnetic Loss Modelling in Electric Machines

Presented by: Dr Mircea Popescu (Chief Technology Officer, MDL), Ben Silvester (PhD Research Student, Warwick Manufacturing Group) and Dr Giuseppe Volpe (Senior eMachine Specialist, MDL)

This workshop will look into detail about the various loss components in electric machines. Complex and difficult to estimate losses—such as core losses under non-sinusoidal supply, AC losses in windings, electrical conducting regions (magnets, solid iron rotors, retaining sleeves) losses—will be investigated for various motor types and applications. The methods and approaches used in Motor-CAD to compute these various loss components will be discussed and the calculations behind the analysis will be explained. The trade-off in accuracy vs computation time between full 3D FEA and hybrid 2D FEA and analytical algorithms will be illustrated. The manufacturing effects and variation of the various loss components will also be covered in detail.

Who should attend? This workshop is intended for experienced Motor-CAD users who would like to learn more about the methods used to calculate and analyse losses.


Workshop 2 – Optimisation Solutions for Electric Machine Design

Presented by: Dr Stjepan Stipetic (Assistant Professor, University of Zagreb), Markus Stokmaier (Dynardo), Dr James Goss (Chief Executive Officer, MDL) and Nicolas Riviere (Research Engineer, MDL)

This workshop will be run by Stjepan Stipetic from the University of Zagreb and Markus Stokmaier from Dynardo. The workshop will introduce the theory behind optimisation of electric machines and will present two optimisation solutions using either the Motor-OPT or OptiSLang tool coupled to Motor-CAD.


Workshop 3 – Combined Motor-CAD and ANSYS Workflow

Presented by: Lester Gomez (CADFEM GmbH), Akeel Auckloo (ANSYS) and Giulia Malinverno (Research Engineer, MDL)

This workshop will introduce the combined Motor-CAD and ANSYS workflow and will demonstrate the automated links between Motor-CAD and the ANSYS tools such as Maxwell, Simplorer, Mechanical, Fluent and ICEPack. The workshop will present a detailed example of the calculation and extraction of magnetic forces in Motor-CAD for motor vibration analysis in ANSYS Mechanical. The workshop will conclude with a presentation of the future roadmap for further coupling between Motor-CAD and ANSYS tools.


Workshop 4 – Advanced Lumped Parameter Thermal Modelling Techniques

Presented by: Dr Eddie Chong (Lead Thermal Specialist, MDL), Husain Adam (Software Developer, MDL) and YaoHui Gai (Senior E-Machine Specialist, MDL)

This workshop will look at how Motor-CAD Thermal can be used effectively in the design process. It will show attendees how to model complex cooling methods and to account for some of the more difficult aspects of thermal behaviour. It will then look at a case study in which a Motor-CAD model is generated, compared and calibrated against experimental test data from oil spray and oil dripping cooling methods. The workshop will also cover how Motor-CAD can work alongside CFD tools extracting the convective heat transfer coefficient for rotor shaft hole cooling and how the lumped parameter thermal model can be used in a system simulation.

Who should attend? This workshop is intended for experienced Motor-CAD users who would like to learn more about the thermal analysis aspects of Motor-CAD and how to effectively integrate it into their design process.

Conference venue

Location: IET Austin Court conference venue

Address: IET Austin Court, 80 Cambridge Street, Birmingham, UK, B1 2NP

Website: https://austincourt.theiet.org/

IET Austin Court


Nearby accommodation

Details of some nearby hotels are below, to help you plan your trip.

Jury’s Inn, Birmingham

Holiday Inn Express, Birmingham City Centre

Hampton by Hilton Birmingham, Broad Street




This event is now over. Thank you to everyone who attended and presented.

Have a question? Drop us an email to and a member of our team will get back to you.

This event is now over. Thank you to everyone who attended and presented at the conference.

For information on how we process your personal data, please take a look at our Privacy Notice.


    The Motor-CAD software is distributed worldwide. Our carefully selected partners are experts in the use of the software and can provide support and training.

    To find a distributor near you, click on the link below.