‘A Comparison of an Interior Permanent Magnet and Copper Rotor Induction Motor in a Hybrid Electric Vehicle Application’, IEMDC 2013
GOSS J., POPESCU M., STATON D.
‘The Design of AC Permanent Magnet Motors for Electric Vehicles: A Design Methodology’, IEMDC 2013
GOSS J., WROBEL R., MELLOR P., STATON D.
‘Brushless AC Interior-Permanent Magnet Motor Design: Comparison of Slot/Pole Combinations and Distributed Vs. Concentrated Windings’, ECCE 2013
GOSS J., STATON D., WROBEL R., MELLOR P.
‘Drive Motor Designs for Electric Motorcycles’, ECCE 2012, Raleigh
DORRELL D.G., POPESCU M.
‘A Line-Fed Permanent Magnet Motor Solution for Drum-Motor and Conveyor-Roller Applications’, ECCE 2011, Phoenix, USA
POPESCU M., STATON D. A., JENNINGS S., SCHNUETTGEN J., BARUCKI T.
‘A Review of the Design Issues and Techniques for Radial-Flux Brushless Surface and Internal Rare-Earth Permanent-Magnet Motors’, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 58, NO. 9, SEPTEMBER 2011
DORRELL D.G., HSIEH M.F., POPESCU M., EVANS L., STATON D.A., V GROUT V.
MDL Torque Issue 33: November 2017
Switched Reluctance Machine E-Mag
Welcome to new staff
Motor CAD User Meeting & Training in USA
Motor Design Headquarter relocation
MDL Torque Issue 32: September 2017
Ariel Hipercar Unveiled
New Office for MDL
MDL Torque Issue 31: August 2017
Motor-CAD Lab Speed Increase
MDL Torque Issue 30: June 2017
Success at Exhibitions
Welcome to new Intern
MDL Torque Issue 29: May 2017
Double Rotor Cage Induction Machine
Motor-CAD Training Course on Design of BPM Motors
Motor Design Ltd Welcomes Sara Roggia
MDL Torque Issue 28: April 2017
Cut edge analysis using Motor-CAD FEA
Launch of MDL Film
Motor-CAD training in China
MDL Torque Issue 27: March 2017
FEA Measurement Functionality
New IPM Magnet Geometries
Launch of web-site
Welcome to Erasmus Student
MDL Torque Issue 26: February 2017
Square Wave Drive Mode
Welcome to new staff
Presentation at Advanced E-Motor Technology 2017
MDL Torque Issue 25: November 2016
MDL Motor Design Training Course, 15th – 18th November 2016, Oswestry, UK
IET Seminar on Practical Control of Salient PM Motors
IEEE IAS Chapter Prominent Lecture on Practical Aspects in the Design & Analysis of Electric Machinery for Power Traction Application
Designing Electric Powertrains for Low Noise Workshop, California, December 06, 2017
EDPC, Wuerzburg, 5th – 6th December 2017
Electric & Hybrid Aerospace, Cologne, 16th – 17th November 2017
Webinar – Optimal layout of electric machines using Motor-CAD and ANSYS optiSLang, 8th November 2017
Design of Brushless Permanent Magnet Motors, 7th – 8th November 2017
EDPE, Duvrobnik, 4th – 6th October 2017
ECCE, Cincinnati, 1st – 5th October 2017
Motor-CAD Users Meeting and Training – 27th to 29th September 2017
CoilTech, Pordenone, 27th – 28th September 2017
Romax European Users Forum, Paris, 26th – 27th September 2017
The Motor-CAD software is distributed worldwide. Our carefully selected partners are experts in the use of the software and can provide support and training.
To find a distributor near you, click on the link below.