Thermal Papers

Brushless PM machines

‘Practical Application of CAD in a High Power Density Motor for a very short duty Aerospace Actuator’, UK Magnetics Society Seminar, Derby, Nov 2008
FLEW, A.

Download this file


‘FEM and Lumped Circuit Thermal Analysis of External Rotor Motor’ IECON 2006, Paris, Nov 2006
TASSI, A., ZANOCCHI, G., STATON, D.A.

Download this file


‘Design of Brushless Permanent Magnet Motors – A Combined Electromagnetic and Thermal Approach for High Performance’ IECON 2006, Paris, Nov 2006
DORRELL, D.G., STATON, D.A., McGILP, M.I.

Download this file


‘Torque Dense, External Rotor Hub-Drive for a Hybrid Solar Vehicle’, 2006 IEEE Vehicle Power and Propulsion Conference VPPC 2006, Windsor, UK, 6-8 Sept., 2006
WROBEL, R., McNEILL, N., STATON, D. A., BOOKER, J. D., MELLOR, P. H.

Download this file


‘Linked Electromagnetic and Thermal Modelling of a Permanent Magnet Motor’, PEMD 2006, Dublin, April 2006.
DORRELL, D.G., STATON, D.A., HAHOUT, J., HAWKINS, D., McGILP, M.I.

Download this file


‘Transient Thermal Analysis using both Lumped-Circuit Approach and Finite Element Method of a Permanent Magnet Traction Motor’, IEEE Africon, pp. 1027 – 1035, Gaborone, Botswana, September 2004
CHIN, Y.K., STATON, D.A.

Download this file


‘Thermal Analysis – Lumped Circuit Model and Finite Element Analysis’, Sixth International Power Engineering Conference (IPEC2003), pp. 952 – 957, Singapore, 27 – 29 November, 2003
CHIN, Y.K., NORDLUND, E., STATON, D.A.

Download this file


‘Servo Motor Size Reduction – Need for Thermal CAD’, Drives & Controls 2001 Conference, ExCeL – Docklands, London, UK, 13-15 March 2001
STATON, D.A.

Download this file


‘Thermal Computer Aided Design – Advancing the Revolution in Compact Motors’, IEEE – IEMDC Conference, MIT, Massachusetts, USA, 17-20 June 2001
STATON, D.A.

Download this file


‘Computer Aided Design of Brushless Servo Motors’, UK Magnetics Society Seminar ‘Developments in Electromagnetic CAD for industrial Applications’, RIBA, London, UK, 28 Feb. , 2001
STATON, D.A., SO, E

Download this file


‘Permanent Magnet Motor CAD – Thermal Design Aspects’, UK Magnetics Society Seminar ‘Developments in the manufacture and use of permanent magnets’, Austin Court, Birmingham, UK, 8 Nov., 2000
STATON, D.A.

Download this file

Induction machines

‘Thermal Analysis of Duplex 3-Phase Induction Motor Under Fault Operating Conditions’, ICEM 2012, Marseille
POPESCU M., DORRELL D. G., ALBERTI L., BIANCHI N., STATON D. A., HAWKINS D.

Download this file


‘Thermal Model and Analysis of Wound Rotor Induction Machine’ ECCE 2012, Raleigh
BOGLIETTI A., CAVAGNINO A., POPESCU M., STATON D.

Download this file


‘Influence of different End Region Cooling Arrangements on End-Winding Heat Transfer Coefficients in Electrical Machines’, ECCE 2010, Atlanta, USA, September 2010
STATON, D.A., POPESCU, M., HAWKINS, D., BOGLIETTI, A., CAVAGNINO, A.

Download this file


‘Impact of Different End Region Cooling Arrangements on Endwinding Heat Transfer Coefficients’, IECON 2009, Porto, Nov 2009
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A., POPESCU, M.

Download this file


‘End space heat transfer coefficient determination for different Induction Motor enclosure types’, Industry Applications Conference, 2008. Edmonton, October 2008
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A., POPESCU, M., COSSAR, C., MCGILP, M.I.

Download this file


‘Analytical Thermal Models for Small Induction Motors & Thermal Analysis’, ICEM 2008, Vilamoura, Portugal, Sept 2008
STATON, D.A., POPSECU, M., COSSAR, C., MCGILP, M., OMORI, S., KURIMOTO, T.

Download this file


‘A Combined Electromagnetic and Thermal Approach to the Design of Electrical Machines’ IECON 2006, Paris, Nov 2006
DORRELL, D.G., STATON, D.A., McGILP, M.I.

Download this file


‘Solving the More Difficult Aspects of Electric Motor Thermal Analysis in Small and Medium Size Industrial Induction Motors’; IEEE Transactions on Energy Conversion, Volume 20, Issue 3, Sept. 2005 Page(s): 620 – 628
STATON, D.A., BOGLIETTI, A., CAVAGNINO, A.

Download this file


‘TEFC Induction Motors Thermal Models: A Parameter Sensitivity Analysis’, IEEE Transactions on Industry Applications, Volume 41, Issue 3, May-June 2005 Page(s): 756 – 763
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A.

Download this file


‘TEFC Induction Motors Thermal Models: A Parameter Sensitivity Analysis’, Industry Applications Conference, 2004. 39th IAS Annual Meeting. Conference Record of the 2004 IEEE Volume 4, 3-7 Oct. 2004 Page(s):2469 – 2476 vol.4
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A.

Download this file


‘Thermal Sensitivity Analysis of TEFC Induction Motors’, IEE PEMD, Edinburgh, April 2004
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A.

Download this file


‘Thermal Analysis of TEFC Induction Motors’, Industry Applications Conference, 2003. 38th IAS Annual Meeting. Volume 2, 12-16 Oct. 2003 Page(s):849 – 856 vol.2
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A.

Download this file


‘1150hp Motor Design, Electromagnetic & Thermal Analysis’, ICEM 2002, Brugge, Belgium, 25-28 Aug. 2002
AL’AKAYSHEE, Q., STATON, D.A.

Download this file

Brushed PM Machines

‘Permanent Magnet DC Motor Brush Transient Thermal Analysis’, ICEM 2008, Vilamoura, Portugal, Sept 2008
JUNAK, J., OMBACH, G., STATON, D.A.

Download this file

Synchronous Machines

‘Thermal Design of a Magnet-free Axial-Flux Switch Reluctance Motor for Automotive Applications’, EVER Conference, Monaco, April 2016
Yew Chuan Chong, Dave Staton, Imanol Egaña, Ismael Ruiz de Argandoña, Aritz Egea

Download this file


‘Improved Synchronous Machine Thermal Modelling’, ICEM 2008, Vilamoura, Portugal, Sept 2008
MEJUTO, C., MUELLER, M., SHANEL, M., MEBARKI, S., REEKIE, M., STATON D.A.

Download this file


‘Thermal Modelling of TEFC Alternators’, IECON 2006, Paris, Nov 2006
MEJUTO, C., MUELLER, M., STATON, D.A., MEBARKI, S., AL-KHAYAT, N.

Download this file


‘Thermal Analysis of Induction and Synchronous Reluctance Machines’, IEMDC 2005, San Antonio, USA, May 2005
BOGLIETTI, A., CAVAGNINO, A., PASTORELLI, M., STATON, D.A., VAGATI, A.

Download this file

General Papers

‘Modern Heat Extraction Systems for Electrical Machines’, WEMDCD 2015
POPESCU M., STATON D.A., BOGLIETTI A., CAVAGNINO A., HAWKINS D., GOSS J.

Download this file


‘An Experimental Study of Rotational Pressure Loss in Rotor Ducts’, UK Heat Transfer Conference 2015
CHONG Y.C., STATON D.A., MUELLER M.A., CHICK J.

Download this file


‘Pressure Loss Measurement in Rotor-Stator Gap of Radial Flux Electrical Machines’, ICEM 2014
CHONG Y.C., STATON D.A., MUELLER M.A., CHICK J.

Download this file


‘Thermal Modelling of a Fractional-Slot Concentrated-Winding Kaman Type Axial-Flux Permanent-Magnet Machine’, ECCE 2013, Denver
VAINEL GY., STATON D. A., GIULII CAPPONI F., DE DONATO G., F. CARICCHI

Download this file


‘Thermal Modelling of a Low Speed Air-Cooled Axial Flux Permanent Magnet Generator’, IET international conference on Power electronics, machines and Drives 2012,
CHONG Y.C., CHICK J., MUELLER M.A., STATON D.A., MCDONALD A.S.

Download this file


‘Practical Strategies for Improved Cooling of Electrical Motors and Generators’, 2012
STATON D., HAWKINS D., POPESCU M.

Download this file


‘Motor-CAD Software for Thermal Analysis of Electrical Motors – Links to Electromagnetic and Drive Simulation Models ‘, CWIEME, Berlin, June 2010
STATON, D.A., HAWKINS D.J., POPESCU M.

Download this file


‘Thermal Behaviour of Electric Motors – An Analytical Approach’, CWIEME, Berlin, May 2009
STATON, D.A., HAWKINS D.J., POPESCU M.

Download this file


‘Evolution and Modern Approaches for Thermal Analysis of Electric Machines’, IEEE Transactions, March 2009
BOGLIETTI, A., CAVAGNINO, A., STATON, D.A., SHANEL, M., MUELLER, M., MEJUTO, C.

Download this file


‘Convection Heat Transfer and Flow Calculations Suitable for Analytical Modelling of Electric Machines’, IECON 2006, Paris, Nov 2006
STATON, D.A., CAVAGNINO, A.

Download this file


‘Coupling Thermal and Electromagnetic Analysis Software’ UK Magnetics Society Seminar: Computer Aided Electromagnetic and Coupled Analysis for Industrial Applications, Stafford, Sept 2004
STATON, D.A.

Download this file


‘Solving the More Difficult Aspects of Electric Motor Thermal Analysis’, IEMDC 2003, Madison, USA, July 2003
STATON, D.A., BOGLIETTI, A., CAVAGNINO, A.

Download this file


‘Recent Advancement in the Thermal Design of Electric Motors’, SMMA 2001 Fall Technical Conference “Emerging Technologies for the Electric Motion Industry”, 3-5 Oct 2001, Raleigh-Durham, North Carolina, USA
STATON, D.A., PICKERING, S.J, LAMPARD, D.

Download this file

Latest News

MDL Torque Issue 33: November 2017

Switched Reluctance Machine E-Mag
Welcome to new staff
Motor CAD User Meeting & Training in USA

Motor Design Headquarter relocation

Due to expansion Motor Design Ltd head office has relocated on 18th September 2017. Please note our new postal address is 5 Edison Court, Wrexham Technology Park, Wrexham , LL13 7YT, UK. Our telephone number and email addresses have not changed.

MDL Torque Issue 32: September 2017

Ariel Hipercar Unveiled
New Office for MDL
Upcoming Events

MDL Torque Issue 31: August 2017

Motor-CAD Lab Speed Increase
Summer Interns
Upcoming Events

MDL Torque Issue 30: June 2017

SYNC E-Mag
Success at Exhibitions
Welcome to new Intern
Upcoming Events

MDL Torque Issue 29: May 2017

Double Rotor Cage Induction Machine
Motor-CAD Training Course on Design of BPM Motors
Motor Design Ltd Welcomes Sara Roggia
Upcoming Events

MDL Torque Issue 28: April 2017

Cut edge analysis using Motor-CAD FEA
Launch of MDL Film
Motor-CAD training in China
Upcoming Events

MDL Torque Issue 27: March 2017

FEA Measurement Functionality
New IPM Magnet Geometries
Launch of web-site
Welcome to Erasmus Student

MDL Torque Issue 26: February 2017

Square Wave Drive Mode
Welcome to new staff
Presentation at Advanced E-Motor Technology 2017

MDL Torque Issue 25: November 2016

MDL Motor Design Training Course, 15th – 18th November 2016, Oswestry, UK
IET Seminar on Practical Control of Salient PM Motors
IEEE IAS Chapter Prominent Lecture on Practical Aspects in the Design & Analysis of Electric Machinery for Power Traction Application

Events

Designing Electric Powertrains for Low Noise Workshop, California, December 06, 2017

Dr Mircea Popescu will attend the workshop. For more information and registration, please click here.

EDPC, Wuerzburg, 5th – 6th December 2017

Dr Unai San Andres Sanz is presenting: The impact of the manufacturing processes on the performance of electric machines For more information, please click here.

Electric & Hybrid Aerospace, Cologne, 16th – 17th November 2017

Dr David Staton will give a presentation. For more information, please click here.

Webinar – Optimal layout of electric machines using Motor-CAD and ANSYS optiSLang, 8th November 2017

Date: Wednesday 8th November 2017 at 8am or 4pm GMT. For more information and registration, please click here.

Design of Brushless Permanent Magnet Motors, 7th – 8th November 2017

This course will contain a mix of theory and design practice. Day 1: An Introduction to Brushless Permanent Magnet Motors & the design procedure. Day 2: An Interactive design & modelling workshop. Motor Design Ltd training course will be taking place 7th and 8th of...

EDPE, Duvrobnik, 4th – 6th October 2017

Dr David Staton will attend the conference. For more information, please click here.

ECCE, Cincinnati, 1st – 5th October 2017

Dr Mircea Popescu and Dr James Goss will be at the Expo For more information please click here.

Motor-CAD Users Meeting and Training – 27th to 29th September 2017

This course will contain a mix of theory and design practice. Day 1 will concentrate on Electromagnetic & thermal design of BPM motors, Day 2 will concentrate on Electromagnetic & thermal design of AC electric motors and Day 3 will concentrate on Electromagnetic &...

CoilTech, Pordenone, 27th – 28th September 2017

Dr David Staton will be given a presentation. For more information, please click here.

Romax European Users Forum, Paris, 26th – 27th September 2017

Dougie Hawkins will be presenting on the NVH performance of IPM machines for traction applications. For more information, please click here.

DISTRIBUTORS

The Motor-CAD software is distributed worldwide. Our carefully selected partners are experts in the use of the software and can provide support and training.

To find a distributor near you, click on the link below.

Newsletter Signup