What is Motor-CAD and how can it help you with your electric motor designs? Join our free, hands-on Motor-CAD workshop to find out.

Motor Design Ltd will be running our next free Motor-CAD workshop at the University of Stuttgart in Germany.

  • Date: 2nd December 2019
  • Location: University of Stuttgart, Stuttgart, Germany.


What you will learn

This workshop will provide a hands-on introduction to Motor-CAD software. Participants will work through a modelling example for synchronous permanent magnet machine and learn how to calculate electromagnetic, thermal and mechanical behaviour, including generating outputs such as efficiency maps and perform analysis over duty cycles. All calculations will be performed live during the day, and at the end of the workshop participants will be able to competently drive Motor-CAD and start to experiment with their own designs and design variations.


Who should attend?

Engineers who wish to learn how to use Motor-CAD to design, analyse and optimise electric machines.


Preliminary Agenda


[one-sixth-first]09:00 – 09.30[/one-sixth-first][five-sixths]Coffee and Registration[/five-sixths][one-sixth-first]09:30 – 11.00[/one-sixth-first][five-sixths]Tutorial Part 1: Motor-CAD overview and electromagnetic analysis[/five-sixths][one-sixth-first]11:00 – 11:15[/one-sixth-first][five-sixths]Coffee break[/five-sixths][one-sixth-first]11:15 – 12:00[/one-sixth-first][five-sixths]Tutorial Part 2: Lab efficiency and drive cycle analysis[/five-sixths][one-sixth-first]12:00 – 12:45[/one-sixth-first][five-sixths]Tutorial Part 3: Thermal analysis[/five-sixths][one-sixth-first]12:45 – 13:30[/one-sixth-first][five-sixths]Lunch[/five-sixths][one-sixth-first]13:30 – 14:30[/one-sixth-first][five-sixths]Tutorial Part 3: Thermal analysis continued[/five-sixths][one-sixth-first]14:30 – 15:15[/one-sixth-first][five-sixths]Tutorial Part 4: Mechanical analysis[/five-sixths][one-sixth-first]15:15 – 15:30[/one-sixth-first][five-sixths]Discussion[/five-sixths][one-sixth-first]15:30 – 16:30[/one-sixth-first][five-sixths]Institute of Electrical Energy Conversion: Lab tour[/five-sixths]


Please note that this is a preliminary agenda and may be subject to change.











Date: 2nd December 2019.

Timings: Registration begins at 09:00am and the workshop will finish at 16:30pm.

Venue: University of Stuttgart, Stuttgart, Germany.

Registration fee: This workshop is free to attend and lunch and refreshments will be provided.


If you are interested in attending please fill out the form on the right-hand side of this page and a member of our team will be in touch to confirm. Please be aware that places are limited.


Registration for this workshop is now closed. To find out about future workshops, please email us at .

For information on how we process your personal data, please take a look at our Privacy Notice.


    The Motor-CAD software is distributed worldwide. Our carefully selected partners are experts in the use of the software and can provide support and training.

    To find a distributor near you, click on the link below.